Lemer RP-460
Professional spray gun for wax, wax and paraffin LEMMER RP-460
Professional equipment for everyday use in industrial environments, manufactured by the Canadian company LEMMER. Convenient for spraying both low-viscosity wax (paraffin) in the cavity and high-viscosity wax under the body, the pressure vessel is able to apply wax up to 125 psi, providing good spraying. The gun comes complete with a flexible rod for application in the cavities, a rod for the cavity at 360 degrees and a flat spray nozzle for the floor of the cabin.

LEMMER HD-460 requires 2 - 8 cfm of air depending on the length of the hose pressure or the viscosity of the wax used. To apply thin waxes, set the regulator to 20 - 40 psi. For thicker waxes set from 60 - 90 psi. The maximum working pressure of 125 psi ensures good spraying of most products. Lemmer has a needle tip and a stainless steel socket, which means that it is also suitable for applying water-based materials ............ Supplied with a 45 degree cavity rod as shown in the photo and an 800 mm extension for injection into a cavity with a 360-degree spray head for complete injection of pipes or sections of cavities. A flat spray tip is also available for spraying thicker materials, such as wax under the body on panels. .... All hoses are equipped with a fixing connector for quick replacement of the rod or nozzle during application.